|
 
|
||
 |
Set of 2 specialty washers and 2 cap nuts for mounting one driver's peg bracket to the frame. Replace your dented cap nut and the dull looking washer with this fresh set, one set does one side.
Code: FPN720 Price: $ 9.45/set of 4 pcs View Item Top 
|
|
 |
Replacement shiftlever assembly, complete with new rubber. Quality reproduction of Kawasaki order number 13242-006. Will fit all KZ750B, 900 Z1, KZ900A+B, KZ1000A/B/D/G/J/K+M models built between 1973 and 1983.
Code: SL7383 Price: $ 19.95 View Item Top
|
|
 |
Replacement Fuel Tank Lid Kit, correct and will fit on all 900 Z1 models built from 1973 to 1975, the 2-stroke H1, H2, S1 and S3 models built from 1969 to 1975 as well as the KH250/400 ('76-'78) models, and the KZ400, D+S models built from '74 to '77. Kit includes the complete fuel tank lid with the lock hook with spring and pin as shown.
Code: FLK696 Price: $ 59.95 View Item Top
|
|
 |
Quality reproduction of Kawasaki part number 32109-1004, the chrome plated grab handle for the KZ1000D models built from 1978 to 1980, better known as the Z1R. Often missing these handles make lifting the heavy bike onto the main stand much easier. Will not fit the KZ650s ! Comes complete as a set; 1 handle with mounting bolt as shown in picture.
Code: Z1RH Price: $ 24.95 View Item Top
|
|
 |
Lightweight engine crash guard set with mounting hardware manufactured by Tarozzi in Italy. Mounts to the engine mounting bolts. Open pipe design does saves weight, but remains as sturdy as any full tube design. Available for the 900 Z1/KZ900/1000 from 1972 to 1980, and the 1976 to 1980 built KZ650 models. Code: TCG720 Price: $ 94.95 set View Item Top
|
|
 |
Stock style headlight bucket in black as used on the KZ650, KZ750B, 900Z1, KZ 900 and KZ1000 models.
Code: HBB700 Price: $ 44.95 View Item Top
|
|
 |
Chrome grabrail that mounts with 4 bolts (which are NOT included) behind the seat to the tailpiece/frame. Often removed and misplaced many H2s are missing this crucial piece. Finally available as an exact reproduction to complete your bike and restore originality. Correct for the 1972 and 1973 H2s, comes with two grey plugs for the lower ends as used on the originals.
Code: GRH2 Price: $ 89.95 View Item Top
|
|
 |
Front Brake Lever Replacement for the 1978 to 1980 KZ1000D1-D3 models a.k.a. Z1R, which are equipped with the original equipment of front brake master cylinder activation by cable.
Code: Z1R-BL Price: $ 14.95 View Item Top
|
|
 |
OEM style LH replacement clutch lever. Fits many Kawasaki models of the late 70s and early 80s with the wide 24mm (15/16") mounting perch, incl. the KZ650/7501000/1100/1300 models.
Code: LCL772 Price: $ 12.95 View Item Top
|
|
 |
Quality reproduction of the LH engine or alternator cover. Correct for all Z1900 and KZ900/1000 produced between 1972 and 1978.
Often the first part to get shaved or cracked when riding hard you have now the opportunity to replace an unsightly engine cover with this affordable replacement. We recommend to order our order number AG730, the replacement stator lead wire grommet, to replace the hardened grommet that inserts into this cover and assure a tight seal, preventing seepage of oil after replacement of the engine cover.
Code: LEC728 Price: $ 129.50 each View Item Top
|
|
 |
Finally the hard-to-find points cover has become available as an excellent reproduction part. Prone to cracking when the bike is tipped over or laid down this exact reproduction is a reasonably priced solution to the dilemma of no availability and costly repairs of the original part. Correct for all 900 and 1000A engines from 1972 to 1980.
Code: PCZ720 Price: $ 59.95 View Item Top
|
|
 |
Chrome headlight mounting bracket correct for many Kawasakis throughout the 70s, including the Z1, KZ650, KZ750B, KZ900 and KZ1000 models (incl. LTDs) from 1973 to 1978 . Sells individually left or right or as a pair.
Price: $ 79.50/ea. View Item Top
|
|
 |
Headlight Stay Kit. This important ring and bushing kit assures, that the headlight brackets remain tightly mounted in between the fork's triple clamps, and neither the triple clamp nor the headlight bracket's chrome gets damaged. 6-piece set as shown. Fits all 900 Z1 models, as well as the KZ900 and KZ1000 A models up to 1978.
Code: HSK728 Price: $ 47.90 View Item Top
|
--> |
 |
OEM style RH replacement front brake lever. Fits most all Kawasaki models (incl. Triples) throughout the 70s until 1980 that actuate the front brake mastercylinder directly, incl. the H1/H2/900Z1/KZ650/750/900/1000 (not Z1R!) + KZ1300
Code: EBL700 Price: $ 12.95 View Item Top
|
|
 |
OEM style LH replacement clutch lever. Fits many Kawasaki models (incl. Triples) throughout the 70s until 1980 with the slim (13mm / ½") perch, incl. the H1, the H2 and the 900Z1
Code: ECL700 Price: $ 13.95 View Item Top
|
|
 |
Pair of lower Gauge Chrome Covers for the stock speedometer and tach of any KZ 650, KZ900, 900 Z1 and KZ 1000 incl. LTD models until 1980.
Code: GBC730 Price: $ 34.95 / pr. View Item Top
|
|
|
|
Stock style pair of lower gauge covers in a gloss black finsih for the speedometer and tach of any KZ 650/900/1000 and 900 Z1.
Code: GBB730 Price: $ 34.95 / pair View Item Top
|
|
 |
Headlight rim kit with mounting hardware, Fits all KZ650, 750, 900 (incl. Z1) or KZ 1000 models.
Code: HRK700 Price: $ 39.95 View Item Top
|
|
 |
Custom made aluminum camshaft endcaps for the 1000J+R and 1100J engines from 1979 to 1986, i.e. the Z1000R, the GPZ and Police models. In comparison to the stock rubber coated endcaps these can be used indefinitely and are sold as a set of 4.
Code: CEC7986 Price: $ 49.95 View Item Top
|
|
 |
Custom made aluminum camshaft endcaps for the 900 and 1000cc aircooled engines 1973-1978. In comparison to the stock rubber coated endcaps these can be used indefinetly. Currently only available in silver Sold in a set of 4. Code: CEC728 Price: $ 49.95 View Item Top
|
|
 |
Chrome headlight bucket as used on the KZ 900 and 1000 LTD models, will fit standard KZ 650 to 1000 as well.
Code: CHB700 Price: $ 45.95 View Item Top
|
|
 |
Upper aluminum bracket, one piece replacement for handlebar mount. Fits all upper triple clamps of the KZ 650 to 1000 models. Comes either in a machined finish, or in a polished, chrome like appearance.
Code: HBM720 Price: $ 59.50 machined / $ 84.50 polished View Item Top
|
|
 |
Chain protection guard with engraved Model number, long model - polished stainless steel.
Code: CGZ1 or CG900 (CG1000 no longer available) Price: $ 79.50 View Item Top
|
|
 |
Chain protection guard with engraved Model number, long model - polished stainless steel.
Code: CGK650/900/1000 Price: $ 79.50 View Item Top
|
|
 |
Stainless Steel ignition lock and control light bezel for the 1973 to 1975 900Z1 models.
Code: IBS725 Price: $ 27.95 View Item Top
|
|
 |
Stainless Steel ignition lock and control light bezel for the KZ650 to KZ 1000 models.
Code: IBS768 Price: $ 27.95 View Item Top
|
|
 |
Lower triple clamp cover. Polished stainless steel for all Z and KZ models of the 70's.
Code: TCC720-Z Price: $ 84.95 View Item Top
|
|
